Driven Tangential Payoff with two spool seats and protection shield

Ø  Spool: 125 mm
Three phase motor with frequency converter: max. 2,2 kW
max. wire speed: 350 m/min
Ø of winding material: 0,1 - 1,2 mm
max. weight of spool: max. 400 kg
Wire tension: 1 N - 50 N

Driven Tangential Payoff for copper-, steelwire and carbon fibers

Ø spool: 160 - 500 mm
Three phase motor with frequency converter: max. 2,2 kW
max. wire speed: 300 m/min
Ø of winding material: 0,3 - 3 mm
max. weight of spool: max. 70 kg
Wire tension:1 N - 70 N

Driven Tangential Payoff

Ø spool: 250 - 560 mm
Three phase motor with frequency converter: max. 2,2 kW
max. wire speed: 350 m/min
Ø of winding material: 0,1 - 1,2 mm
max. weight of spool: max. 400 kg
Wire tension: 1 N - 50 N

Driven tangential pay-off with:
- Wire break sensor
- Protective hood
- Deflection roller for smooth wire feed etc.

Ø spool: 250 - 560 mm
Three phase motor with frequency converter: max. 2,2 kW
max. wire speed: 350 m/min
Ø of winding material: 0,1 - 1,2 mm
max. weight of spool: max. 400 kg
Wire tension: 1 N - 50 N

Driven tangential pay-off for two spoolseats with wire break sensor
Protective hood as an option

Ø spool: 355 - 560 mm
Three phase motor with frequency converter: max. 2,2 kW
max. wire speed: 300 m/min
Ø of winding material: 0,1 - 1,0 mm
max. weight of spool: max. 200 kg
Wire tension: 1 N - 50 N

Driven Tangential Payoff with 2 spool seats

Ø spools: 400 - 630 mm
max. wire speed: 500 m/min
for single or multi wire
wire tension: 2 - 120 N
with wire break sensor
with protective grid

Driven Tangential Payoff with 2 spool seats

Ø spools: 630 - 800 mm
max. wire speed: 500 m/min
for single or multi wire
wire tension: 5 - 200 N
with wire break sensor
with protective grid

extendable up to 10 modules

Driven tangential pay-off with:
- Wire break sensor
- Protective hood
- Deflection roller for smooth wire feed etc.

Ø spool: 450 - 600 mm
Three phase motor with frequency converter: max. 3 kW
max. wire speed: 350 m/min
Ø of winding material: 0,2 - 1,5 mm
max. weight of spool: max. 500 kg
Wire tension: 4 N - 80 N

Driven tangential pay-off for 2 spoolseats with:
- Wire break sensor
- Protective hood
- Deflection roller for smooth wire feed etc.

Ø spool: 560 - 700 mm
Three phase motor with frequency converter: max. 3 kW
max. wire speed: 300 m/min
Ø of winding material: 0,4 - 2 mm
max. weight of spool: max. 600 kg
Wire tension: 5 - 100 N

Driven Tangential Payoff

This Payoff enables wire to run from spools with Ø 80 - 200 mm. It is built as a modulus design unit with transparent shielding and working-signal light. The winding speed is controlled by dancer arm and adapted to the following working process. The tension is adjusted by spring load of the dancer.

Driven Tangential Payoff

This Driven Tangential Payoff with tension and rpm control by sensor and dancer is used to feed extrusion lines and bunching machines as well as stranding machines.
The spools shaft with bearings on one side is driven by an AC synchronous motor with freqency inverter.
Available with or without frame rollers.
The spools are clamped with an Easylock clamping system.

Driven Tangential Payoff

This Driven Tangential Payoff with tension and rpm control by sensor and dancer is used to feed extrusion lines and bunching machines as well as stranding machines.
The spools shaft with bearings on one side is driven by an AC synchronous motor with freqency inverter.
The spools are clamped with an Easylock clamping system.
Wire break monitoring as an option.

Driven Tangential Payoff with two spool seats

Driven Tangential Payoff with tension and rpm control by dancer via sensor and tension spring.
The spools are clamped with an Easylock clamping system.

Driven Tangential Payoff with two spool seats

Driven Tangential Payoff with tension and rpm control by dancer via sensor and tension spring.
The spools are clamped with an Easylock clamping system.

Coil unwinder for wire, stainless steel wire

Ø Coil: 400 - 800 mm outside
Three-phase motor with frequency converter:
0,75 - 1,5 KW / 230 V / 16 A
Winding spindle speed: max. 200 min
Diameter range of the winding material: Ø 0,4 - 2,5 mm
max. coil weight: max. 250 kg
Adjustment range inside: Ø 250 - 500 mm

Driven Tangential Payoff with tension and rpm control by dancer via sensor and tension spring.
The spools are clamped with an Easylock clamping system.
Also suitable for single steel wire

Flange Ø: 710 (500 - 800 mm optional)
Ø Single wire: 0,5 - 3 mm
Ø Multiwire: max. 10 mm2
Wire speed: max. 350 m/min