F20G-Gfk710HTK
Low weight glass fibre arm for high speed applications mounted in frame
Flange Ø: 710 mm
Multiwire: max. 7 x 0,13 mm
Ø Cu-, Al wire: 0,2 - 0,8 mm
Ø Steelwire hard: max.0,4 mm
Ø Steelwire soft: max. 0,6 mm
Wire speed: max. 400 m/min
Wire tension: min. 2 N, max. 9 N
The unit is especially designed also for yarns with low drafts. Dancer accumulator with 2 Ø 98 mm deflection pulleys and wire tension compensator for bobbins up to max. approx. Ø 710 mm. Wire break detector
F24G-N560/630YHK
Flyer Payoff mounted in frame, with hysteresis brake and tension compensator,
with Ø 80 mm pulleys
for spools Ø 560 - 630 mmFlange Ø: 560 - 630 mm
Ø Cu-, Al wire: 0,4 - 1 mm
Ø Steelwire hard: max. 0,6 mm
Ø Steelwire soft: max. 0,9 mm
Wire speed: max. 180 m/min
Wire tension:min. 5 N, max. 28 N
F26G-2M630/800PHTZ
with tension control via dancer control
Flange Ø: 630 - 800 mm
Multiwire: max. 8 x 0,55 mm
Ø Cu-, Al wire: 0,6 - 1,9 mm
Ø Steelwire hard: max. 0,3 mm
Ø Steelwire soft: max. 1,5 mm
Wire speed: max. 300 m/min
Wire tension: 6 N - 49 N
In this unit, tension control is performed with a dancer control, whereby the magnetic powder brake on the unwinding flyer is controlled via a potentiometer. The reference for the constant tension over the entire diameter range is the spring setting on the dancer accumulator. A wire tension compensator equalizes the periodic tension oscillations.
F26G-N630/800PHK
Flyer Payoff with Ø 98 mm pulleys mounted in frame, with dancer accumulator
and wire tension compensator
for spools Ø 630 - 800 mm
Flange Ø:630 - 800 mm
Ø Cu-, Al wire: 0,6 - 1,9 mm
Ø Steelwire hard: max. 0,8 mm
Ø Steelwire soft: max. 1,5 mm
Wire speed:max. 250 m/min
Wire tension: min. 4 N, max. 36 N
F26G-2M630/800PHTK
Flyer Payoff with Ø 98 mm pulleys mounted in frame, with dancer accumulator and wire tension compensator.
Flyer with magnetic particle brake and cylindric roller
for spools ¯ 630 - 800 mm
F26G-2M800/1000YHTK
Flyer Payoff as above,
but for spools Ø 800 - 1000 mm and with hysteresis brake
Multiwire: max. 8 x 0,55 mm
Ø Cu-, Al wire: 0,6 - 1,9 mm
Ø Steelwire hard: max. 0,6 mm
Ø Steelwire soft: max. 1,5 mm
Wire speed: max. 250 m/min
Wire tension: min. 6 N, max. 49 N
F30G-M900/1250PHT
Flyer Payoff with Ø 166 mm pulleys mounted in frame, with dancer accumulator.
Flyer with magnetic particle brake and cylindric roller
for spools Ø 900 - 1250 mm.
Flange Ø: 900 - 1250 mm
Multiwire: max. 19 x 0,67 mm
Ø Cu-, Al wire: 1 - 3 mm
Ø Steelwire hard: max 1,8 mm
Ø Steelwire soft: max. 2,2 mm
Wire speed: max. 300 m/min
Wire tension: min. 8 N, max. 90 N
A1/4-F26G-2M560/800YT
Payoff frame pileable with dancer accumulator and hysteresis brake
for spools Ø 560 - 800 mm
Flange Ø: 560 - 800 mm
Ø Cu-, Al wire: 0,5 - 1,6 mm
Multiwire: max. 8 x 0,65 mm
Ø Steelwire hard: max. 0,8 mm
Ø Steelwire soft: max. 1,2 mm
Wire speed: max. 200 m/min
Wire tension: min. 4 N, max. 28 N
A1/4-F21G-Gfk 630/800YT
Payoff frame as above, but with glass fibre arm for high speed applications and hysteresis brake
for spools Ø 630 - 800 m
Flange Ø: 630 - 800 mm
Ø Cu-, Al wire: 0,2 - 0,8 mm
Multiwire: max. 8 x 0,35 mm
Ø Steelwire hard: max. 0,4 mm
Ø Steelwire soft: max. 0,6 mm
Wire speed: max. 450 m/min
Wire tension: min. 2 N, max. 16 N
A1/4-F21G-Gfk 630/800T
Same Payoff frame, but withouthysteresis brake
With the shown Flyer mounted in a frame,
wire tension of 1,0 - 10 N and wire speed up to 800 m/min are possible.
For higher tension its possible to use an additional hysteresis brake.
Flange Ø: 630 - 800 mm
Ø Cu-, Al wire: 0,2 - 0,8 mm
Multiwire: max. 7 x 0,25 mm
Ø Steelwire hard: max. 0,4 mm
Ø Steelwire soft: max. 0,6 mm
Wire speed: max. 800 m/min
Wire tension: min. 2 N, max. 19 N
Order Spicifications
Overview of the >Order Specifications for the various product components
Configurator
Our service for you:
You can use the >questionnaire to make detailed product inquiries.
You will receive an answer as soon as possible.
>Catalogue Download (PDF)
for wire pay-offs
Rewinders, spoolers
and unwinders
(file size approx. 9MB)