Take Up TU-20/80
Spooler for spools from Ø 20 mm to Ø 80 mm, equipped with a revolution counter (6 numbers) to preset and automatic stop. Spools spanning with shaft and and collet bush spanning.
A length counter (meter) is available as an option and also a wire brake switch.
The machine can work with either single or double spoolseat.
Also available with protection grid. Table framework on request.
Take UP TU-80/200AT
The shown Payoff is motorized and able to pay off wires from spools of Ø 80 - 200 mm. It is built as a modulus design unit with transparent shielding and working-signal light.
The winding speed is controlled by dancer and adapted to the following working process. The tension is adjusted by spring load of the dancer.
Diameters of wire to work with: Cu/Al Ø 0,014 - 0,3mm
Wire with tensile strength more than 350 N/mm: 0,01 - 0,15 mm
RPM of spindle: 0 - 3000 min-1
Traverse distance: max. 160 mm
Three phase motor with frequency converter: 1,2 kW (or as customers specification)
Traverse:“ Uhing" Type Kinemax
With table framework available
Take Up TU2-250/400
This Take Up is equipped with double spool head. Both spools can be controlled individually.
The spools are quickly mounted with a pinole clamp. The double sided traverse is executed by an "Uhing" winding drive.
The unit is equipped with an electric revolution counter
(6 numbers) and an automatic stop. The start and stop ramps can be adjsted freely via a frequency switch.
Length counter (meter), protection grid and a constant digital speed display (m/min) are available on request.
Take Up TU2-280
with double spool head
Three phase motor with frequency converter: 2 - 4 kW
RPM of spindle on request:
0 - 500 min, 0 - 1500 min, 0 - 3000 min, 0 - 5000 min
dia. of wire, insulated wire etc.: 0,3-11 mm
max. Coilweight: 50 kg
max. traverse distance: 160 mm
max. weight of Double Head Spooler
All units are also available with protection grid.
Take Up TU2-350/500
with double spool head
The bobbin winder is equipped with double-sided bobbin take-up. Both bobbins can be controlled independently of each other.
The bobbins are quickly tensioned by means of an easylock system. The laying on both sides is done by a "Uhing Traverse".
The rewinder is equipped with an electric preselection counter (6 digits) and automatic stop. Start and stop ramps can be freely programmed via the frequency converter.
Take Up TU-560/630
Take Up TU-630/800
Spool diameter: 560-630 mm oder 630-800 mm
Three phase motor with frequency converter: 3 - 6 kW
Traverse:“ Uhing" Type RG 30
Drehzahl der Wickelspindel:
TU 560/630: 0 - 450 min,
TU 630/800: 0 - 350 min
max. traverse distance:
TU 560/630: 430 mm,
TU 630/800: 530 mm
max. Spool lenght:
TU 560/630: 590 mm,
TU 630/800: 620 mm
Take Up TU2-630-S
Spool diameter: 560 - 630 mm
Three phase motor with frequency converter: 3 - 5 kw
Traverse: Type Uhing
RPM of spindle adjustable depending on application:
ca. 0 - 500 min-1
Diameter of material to wind or as per specification:
0,3 - 8,0 mm
max. Coilweight: 500 kg
max. traverse distance: 450 kg
Configurator
Our service for you:
You can use the >questionnaire to make detailed product inquiries.
You will receive an answer as soon as possible.