Overwiew spool diameter

Take Up TU-20/80

Spooler for spools from Ø 20 mm to Ø 80 mm, equipped with a revolution counter (6 numbers) to preset and automatic stop. Spools spanning with shaft and and collet bush spanning.
A length counter (meter) is available as an option and also a wire brake switch.
The machine can work with either single or double spoolseat.

Take Up TU-60/200

This Take Up is intended to be equipped with one or two spools.
The spools are quickly mounted with a pinole clamp. The wire traverse is executed by an "Uhing" winding drive.
The traverse distance can be changed during operation via a spindle. The unit is equipped with an electric revolution counter (6 numbers) and an automatic stop. The start and stop ramps can be adjsted freely via a frequency switch.
Length counter (meter), protection grid and table framework are available on request.

Take Up TU-63/160-2AW1

This Take Up is intended to be equipped with one or two spools.
The spools are quickly mounted with a pinole clamp.
The wire traverse is executed by a laser controlled traverse unit.

Available with one or two spool seats.
Length counter (meter), guard and table framework are available on request.

    Optional mit Meterzähler und Schutzhaube

Take Up TU-63/125 Dance controlled with tension force indicator

Spooler/Take Up TU-80/200AT

The shown Payoff is motorized and able to pay off wires from spools of Ø 80 - 200 mm. It is built as a modulus design unit with transparent shielding and working-signal light.
The winding speed is controlled by dancer and adapted to the following working process. The tension is adjusted by spring load of the dancer.

.

Coilwinder TU-100/335 with oiler

This coil winder is equipped with a revolution counter (6 numbers) to preset and automatic stop.
A length counter (meter) is available as an option and also a wire brake switch.

With table framework available

Winder TU-125/390AW1with automatic travers

Automatic traverse consisting of:
Drive Unit with traversing carriage for mounting of the laser sensor and the wire guide roller and a stepping motor.
Lasersensor: measures the shape of the spool and the wire foreward in both directions.
Terminal: is used for input, storage of winding data and for operating and display of winding data while running operation.
Controller:controls and regulates the wire traverse. In the controller all data input via the terminal are stored, so that an operation is possible without a terminal.
Also, the controller has an interface via which a simple communication with a SPS is possible.
As an option: protection cover made of stainless steel with inspection window and a meter counter

Coil winderr TU-150/390-2

This coil winder is equipped with a revolution counter (6 numbers) to preset and automatic stop.
A length counter (meter) is available as an option and also a wire brake switch.

Take Up TU-160-355

This Take Up is equipped with an electric preset counter with automatic stop.
Meter counter as an option.
Quick coil clamping via apinole.
Optional: Display m / min - constant winding speed.

Take Up TU-160/400

This Take Up is equipped with an electric preset counter with automatic stop.
Meter counter as an option.
Quick coil clamping via apinole.

Take Up TU-160/355 with guard

This Take Up is equipped with an electric preset counter with automatic stop.
Meter counter as an option.
Quick coil clamping via apinole.
Optional: Display m / min - constant winding speed.

Take Up TU-160/355-2

This Take Up is equipped with double spool head. Both spools can be controlled individually.
The spools are quickly mounted with a pinole clamp. The double sided traverse is executed by an "Uhing" winding drive.
The unit is equipped with an electric revolution counter (6 numbers) and an automatic stop. The start and stop ramps can be adjsted freely via a frequency switch.
Length counter (meter), protection grid and a constant digital speed display (m/min) are available on request.

Take Up TU-200/250-2

This Take Up is equipped with double spool head. Both spools can be controlled individually.
The spools are quickly mounted with a pinole clamp. The double sided traverse is executed by an "Uhing" winding drive.
The unit is equipped with an electric revolution counter (6 numbers) and an automatic stop. The start and stop ramps can be adjsted freely via a frequency switch.
Length counter (meter), protection grid and a constant digital speed display (m/min) are available on request.

Take Up TU-250-400-2

This Take Up is equipped with double spool head. Both spools can be controlled individually.
The spools are quickly mounted with a pinole clamp. The double sided traverse is executed by an "Uhing" winding drive.
The unit is equipped with an electric revolution counter (6 numbers) and an automatic stop. The start and stop ramps can be adjsted freely via a frequency switch.

Length counter (meter), protection grid and a constant digital speed display (m/min) are available on request.

Take Up TU-280

Single spool head with fast spanning equipment

Three phase motor with frequency converter	2 - 4 kW
RPM of spindle subject to specify	0 -   500 min,  0 - 1500 min 0 - 3000 min,  0 - 5000 min
dia. of wire, insulated wire etc.	0,3-11 mm
max. weight of spool	50 kg
max. traverse distance	160 mm
max. weight of Double Head Spooler	ca. 430 kg

Take Up TU-280-2 with double spool head

Three phase motor with frequency converter	2 - 4 kW
RPM of spindle subject to specify	0 -   500 min,  0 - 1500 min 0 - 3000 min,  0 - 5000 min
dia. of wire, insulated wire etc.	0,3-11 mm
max. weight of spool	50 kg
max. traverse distance	160 mm
max. weight of Double Head Spooler	approx. 430 kg

All units are also available with protection grid as shown left

Take Up TU-350/500-2 double spool head

Spool diameter	350 - 500 mm
RPM of spindle	10 -600 min or per customers specification
Traverse	"Uhing" Type RG 20
max. weight of spool	300 kg
traverse distance	per customers specification

Also available with protection grid.

Take Up TU-560/630
Take Up TU-630/800

Spool diameter	560-630 mm oder 630-800 mm
RPM of spindle	TU 560/630: 0 - 450 min TU 630/800: 0 - 350 min
Three phase motor with frequency converter	3 - 6 kW
Traverse	"Uhing" Type RG 30
max. traverse distance	TU 560/630: 430 mm TU 630/800: 530 mm
max. Spool lenght	TU 560/630: 590 mm TU 630/800: 620 mm

Also available with protection grid.

Coilwinder TU-560/700

Spool diameter	max. 700 mm
Three phase motor with frequency converter	3 - 5,5 kW
Traverse	"Uhing" Type
RPM of spindle adjustable acc. to application	0 - 300 min
diameter of wire or on demand	560 - 700 mm Coil
max. coil weight	approx. 300 kg
max. traverse distance	approx. 355 mm
max. traverse weight	approx. 600 kg

Take Up TUB-630/800AT
                TUB-630/900

	TUB-630/800AT	TUB-630/900
Spool diameter	630 - 800 mm	630 - 900 mm
Three phase motor with frequency converter	3 - 5 kW	3 - 7 kW
Traverse	"Uhing" Type RG 30	"Uhing" Type RG 30
RPM of spindle adjustable depending on application	ca. 0 - 500 min	ca. 0 - 400 min
Diameter of material to wind or as per specification	0,3 - 12 mm	0,8 - 20 mm
max. weight of spool	800 kg	900 kg
max. Traverse distance	530 mm	570 mm
max. Spool lenght	620 mm	690 mm

Also available with protection grid.
Morable tailstocks driven by a motorhydraulic unit.

Take Up TU-630/1000

Take up for spools Ø 630 - 1000 mm.
Motorhydraulic lifter for spools.

Coilwinder TU-650-2 with protection grid

Coilwinder TU-700

Coil winder for spools Ø 700 mm outer diameter
Electro hydraulic spool clamping and lifting

Take UP TU-900

A preselectable meter counter with automatic stop provides for exact length specification of the winding material.

For the withdrawal of the coil the outside spool flange is taken by
manual unblocking and the tied coil is then taken by pneumatic push out
from the collapsing reel core by a fork lifter.

Take Up TU-900/1250

Spool diameter	900 - 1250 mm
Three phase motor with frequency converter	3 - 10 kW
Traverse	"Uhing" Type RG 40
RPM of spindle adjustable depending on application	ca. 0 - 300 min
Diameter of material to wind or as per specification	0,8 - 25 mm
max. weight of spool	1600 kg
max. Traverse distance	850 mm
max. Spool lenght	950 mm

Motorhydraulic lifter for spools

Take Up / Payoff DPB-TUB-800/1600

This Take Up / Payoff is equipped with a hydraulic spool lifter. The spools are clamped hydraulically by a sleeve on keystroke. This unit is used for take up as well as for pay off steel wires, cables etc. Tasks like speed, tension, start and stop can be adjusted by a remote control. The traverse is executed by a "Uhing Traverse Drive". The start and stop ramps can be adjsted freely via a frequency switch. Length counter (meter), protection grid and a constant digital speed display (m/min) are available on request.