Skip to main content

Matched Hysteresis Brakes

with shaft on one or both sides

These units are developed to asure that every brake of a given model desiguation will be matched at a predeterminated torque and current point to every other brake of the same model designation. By possibility of a special adjustment each brake will be matched at the selected match point to within ±1.5% provided that the match point is above 50 % of the max possible torque. All other points of the curve then are within ±4% deviation from each other. The use of matched hysteresis brakes is for example of advantage for a multi tension control system for multi spool payoff frames.

For complete technical data and dimensions, the >Data Sheet (PDF) can be downloaded.

Likewise, 3D drawings in IGS or STEP can be downloaded.
After clicking in the table, a window opens with the corresponding ZIP file.

Type Torque at working current
(Nm)
Working current I1
(mA)
rpm max. 25°C
10%
(min)
Possible dissipation (W)Download
non continouscontin.
HB-3M-2DS0,02415520000205PDFIGSSTEP
HB-10M-2DS0,09514320000358PDFIGSSTEP
HB-20M-2DS0,150232200005012PDFIGSSTEP
HB-50M-2DS0,380270150009023PDFIGSSTEP
HB-140M-2DS1,2002701200030075PDFIGSSTEP
HB-250M-2DS2,30028910000450110PDFIGSSTEP
HB-450M-2DS3,8004738000670160PDFIGSSTEP
HB-750M-2DS6,20041070001000200PDFIGSSTEP
HB-1750M-2DS15,10054060002400350PDFIGSSTEP
HB-3500M-2DS30,200107060004800600PDFIGS

STEP

Application Examples

>Application Examples (PDF)

 

Configurator

Our service to you:
with the >Questionair you can get more detailed information about our products.

>Type selection (PDF) and sizing

Catalog-Download

>Catalog Download (PDF)
for Current Controlled Hysteresis Brakes
(Size approx. 5MB)