Flyer with Tension Control / Tension Adjustment (to be quoted with shielding optional)
  back

F21G-Gfk500/800PHTK Flyer with ultrasonic control for constant tension


A magnetic particle brake is mounted on the flyer of the shown payoff to be adjusted with a decreasing torque when the spool gets empty. For this an ultrasonic sensor is detecting the increasing distance to the unwinding surface and by means of this the electronic control unit is giving less current to the flyer brake that takes care for constant tension of the wire. Periodic variations of the tension are equalized by the tension compensator arm.

 

Flange Ø 500 - 800 mm
Multiwire 7 x 0,15 - 8 x 0,35 mm
Ø Cu-, Al wire 0,15 - 0,9 mm
Ø Steelwire hard max. 0,3 mm
Ø Steelwire soft max. 0,5 mm
Wire speed max. 800 m/min
Wire tension 5 N - 18 N
 

F26G-2M630/800PHTZ with tension control by a dancer accumulator


This unit is equipped with a tension control by dancer accumulator. By a potentiometer the dancer controls the braking torque of the magnetic particle brake that is connected to the payoff flyer. The tension, that is constant over the complete diameter range, is created by reference of the spring adjustment at the dancer.

 

Flange Ø 630 - 800 mm
Multiwire max. 8 x 0,55 mm
Ø Cu-, Al wire 0,6 - 1,9 mm
Ø Steelwire hard max. 0,3 mm
Ø Steelwire soft max. 1,5 mm
Wire speed max. 300 m/min
Wire tension 6 N - 49 N
 

F21G-Gfk560/630HAT Driven Flyer Payoff
F21G-Gfk630/800HAT Driven Flyer Payoff


For tension controlled wire speeds up to max. 600 m/min
with wires for example 6 x 0,1 mm, 7 x 0,13 mm, 7 x 0,2 mm, 12 x 0,19 mm dia. or similar
dancer regulated driven Flyer Payoffs are preferably used.

 

Flange Ø 560 - 800 mm
Multiwire max. 8 x 0,35 mm
Ø Cu-, Al wire 0,1 - 0,9 mm
Ø Steelwire hard max. 0,3 mm
Ø Steelwire soft 0,08 - 0,6 mm
Wire speed max. 600 m/min
Wire tension 1 N - 18 N
The Payoff is equipped with a glasfibre-flyerarm that is driven by an AC-motor. Control of the motor by a 4 Q control unit and frequency inverter. The unit is especially suitable for higher wire tensions and high speed spooling in start/stop use. It is working very even and with most constant tension.

F46G-N560/630HAT    Driven Flyer Payoff
F26G-2M630/800HAT Driven Flyer Payoff

 

Flange Ø 560 - 800 mm
Multiwire max. 8 x 0,40 mm
Ø Cu-, Al wire 0,1 - 1,4 mm
Ø Steelwire hard max. 0,6 mm
Ø Steelwire soft 0,1 - 1,0 mm
Wire speed max. 300 m/min
Wire tension 1 N - 40 N

The Payoff is equipped with a glasfibre-flyerarm that is driven by an AC-motor. Control of the motor by a 4 Q control unit and frequency inverter. The unit is especially suitable for higher wire tensions and high speed spooling in start/stop use. It is working very even and with most constant tension.

 

 

 

Execution with shielding
  back
mobac GmbH · Bunsenstraße 1· D-24145 Kiel · Tel. +49 (0)431-65 02 77 · Fax +49 (0)431-65 05 11 · mobac@t-online.de